For Sale - Original Olds Cutlass Chrome Bumper Trim New
THIS IS ONE FULL SET OF CHROME BUMPER TRIM STRIPS, FOR THE FRONT AND BACK RUBBER BUMPER COVERS.
FRONT AND REAR CHROME BUMPER STRIP'S TO FINISH UP THAT 81,82,83,84,85,86,87,88,OLDS CUTLASS,442 , HURST/OLDS
This is the FULL SET OF CHROME BUMPER STRIPS that go over top the FRONT and the BACK bumper's, in the plastic bumper, that will fit 81thru 88 CUTLASS or 442 or HURST/OLDS .
They are easy to install after you pull off the old trim. After pulling off old trim, take a straight edge screw driver that will fit and lay flat in the groove and scrap any old big chunk's of adhesive that was left in groove when you pulled old trim off so that the new trim will lay flat in groove when you put it on. Then take the new trim, one piece at a time, and just peel back the red tape on back, and start at one end of bumper and tuck it in corner and push it against the groove of the rubber bumper and stick back in place of old trim. Simple as that! This trim has the 3M adhesive on back of it and it fit's perfectly and will not come off unless you pull it off.
This trim is NEW and come's with a blue protective plastic coating on the front side to protect the chrome finish till installed.The protective coating peel's right off before you install the trim or after you install the trim, also includes chrome trim strips fit under these end connector's right under the license plate on each side.
The price for this is $125.00 which includes shipping ( U.S. Only)
Please E-mail me back at Sadelstein@yahoo.com
No Returns all sales are final on this item
THIS IS ONE FULL SET OF CHROME BUMPER TRIM STRIPS, FOR THE FRONT AND BACK RUBBER BUMPER COVERS.
FRONT AND REAR CHROME BUMPER STRIP'S TO FINISH UP THAT 81,82,83,84,85,86,87,88,OLDS CUTLASS,442 , HURST/OLDS
This is the FULL SET OF CHROME BUMPER STRIPS that go over top the FRONT and the BACK bumper's, in the plastic bumper, that will fit 81thru 88 CUTLASS or 442 or HURST/OLDS .
They are easy to install after you pull off the old trim. After pulling off old trim, take a straight edge screw driver that will fit and lay flat in the groove and scrap any old big chunk's of adhesive that was left in groove when you pulled old trim off so that the new trim will lay flat in groove when you put it on. Then take the new trim, one piece at a time, and just peel back the red tape on back, and start at one end of bumper and tuck it in corner and push it against the groove of the rubber bumper and stick back in place of old trim. Simple as that! This trim has the 3M adhesive on back of it and it fit's perfectly and will not come off unless you pull it off.
This trim is NEW and come's with a blue protective plastic coating on the front side to protect the chrome finish till installed.The protective coating peel's right off before you install the trim or after you install the trim, also includes chrome trim strips fit under these end connector's right under the license plate on each side.
The price for this is $125.00 which includes shipping ( U.S. Only)
Please E-mail me back at Sadelstein@yahoo.com
No Returns all sales are final on this item
Attachments
Last edited: