Exhaust ports epoxy

G

G-930278

Guest
Hi has anyone used high temp epoxy for exhaust ports , looking to touch up both center ports to smooth out little thanks anyone?
 

Jawsmon

New member
Joined
Feb 15, 2021
Messages
1
Reaction score
0
Points
1
Location
Mount Vernon, WA
Epoxy would be taboo. It might last for a brief period but would deteriorate rather quickly.

1st choice would be to repair with cast iron. There are a variety of techniques used to accomplish this. Take it to a local cast iron repair shop if there's one in your area.

2nd choice would be brazing with an oxy/ acet torch and flux coated brass rod. I have personally done this and it is very effective.
 
Top