oldsmobile forums   oldsmobile forums


Go Back   Oldsmobile Forums > Older Requested Oldsmobile Models > Oldsmobile 442

Notices

Oldsmobile 442 Forum specifically intended for Oldsmobile 442 based discussions.

Oldsmobile Forum: 71 442 OAI Air Cleaner on Edelbrock Performer Intake Fitment
Reply
 
Thread Tools
  #1  
Old 3 Weeks Ago
atric atric is offline
Junior Member
 
Join Date: Sep 2017
Posts: 2
atric is on a distinguished road
Thumbs up Resolved: 71 442 OAI Air Cleaner on Edelbrock Performer Intake Fitment

Hey folks, does anyone know what mods will need to be done in order to get an Edelbrock Performer intake manifold to work/fit with a 71 442 with 455ci engine under its OAI ram air hood and intake air setup?

I'm rebuilding my 71 442's engine and while it's out wish to increase its performance with a more modern intake, cam combo and higher comp pistons while still trying to keep as much stock appearance/functionality as possible.

I've measured my stock steel intake and verified that the 455 intakes are about 1 3/4" shorter than the Edelbrock Performer. However I've read that there are some tricks or mods one can make in order to get the Performer to work with the OAI intake and ram air hood including the following:

1) Flip over the OAI top cover that has the vacuum actuated flap door and remove the rubber seal thats connects to the air cleaner base. This sounds a bit hokey but maybe it'll be viable. Anyone done this successfully?

2) Substitute some '69 Camaro cowl induction OAI pieces into the existing 442 ones. This would include the Camaro intake flange, seal and filter/element cover. This one sounds interesting but I don't want to try and track down expensive parts like this without knowing for sure that it'll work.

Any pearls of wisdom or experience with making this combo work will be greatly appreciated...

Last edited by atric; 3 Weeks Ago at 03:13 PM.
Reply With Quote

  #2  
Old 3 Weeks Ago
atric atric is offline
Junior Member
 
Join Date: Sep 2017
Posts: 2
atric is on a distinguished road
The Fix: Learned today that Mondello sells the Edelbrock Performer with it's carb flange surface milled down enough to fit this intake and a carb under the stock Olds 442 OAI intake and hood. Their price for the Intake is the same as other retailers (Summit, Jegs, etc) but they do charge an additional $100 for the milling service when you buy the intake from them.
Reply With Quote
Reply

Tags
442, edelbrock, intake manifold, oai, performer


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -4. The time now is 06:19 AM.


Advertising
cars connected social network cars connected social networking app for ios cars connected social networking app for android

suspension parts, shocks, struts and more




Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2017, vBulletin Solutions Inc.
oldsmobileforums.com recognizes that "Oldsmobile", it's logos and various model names and numbers are registered trademarks of the General Motors Corporation. These terms are used for identification purposes only. oldsmobileforums.com is not affiliated in any way with the General Motors Corporation, Oldsmobile or any other company listed herein. All information on this site is the opinion of its members and not the opinion of the site itself. ©2017 oldsmobileforums.com. All rights reserved.
MADISON ROSS MEDIA GROUP MARKETPLACE
Need products for your Oldsmobile? Check out your options at the links below:

Miss that Olds 442? Believe it or not, Kia may have something for you. The Kia Stinger is a large sport-oriented hatchback sedan in the mold of the Audi A7.